Drones: Confined-space Visual & Thickness Inspection
Use drones for visual inspection inside tanks, cargo holds, and plant equipment, with ultrasonic thickness measurement at selected points. Replace part of scaffold- and lift-based inspection while inspecting from outside the asset.
- Assisted flight and illuminated imaging inside GNSS-denied confined spaces
- Contact measurements on steel with a dedicated UT probe and couplant
- Record images, measurement locations, and thickness readings for inspection reporting
- Reduce time spent inside assets and the need for scaffolding at height
- Collect images and thickness data from confined or elevated areas to inform repair and further inspection
- Access opening, internal geometry, deposits, surface condition, and achievable probe contact
- Gas-free status, ventilation, residue, explosion-protection requirements, tether snagging, and recovery procedures
- Acceptance for class or statutory surveys depends on the method, personnel, approval scope, and site conditions, not only the drone
精选候选
精选可在现场实际使用的机型，并附上适用理由。“PoC”表示建议先进行小范围验证的机型。
UT ドローン
点検サービス：タンク・貨物倉内部の超音波板厚を計測するドローン
UT drone inspection service with a manufacturer-reported bulk-carrier hold inspection. Treat this as a service rather than standalone hardware sales, and confirm assets, measurement points, and approval scope.
Scout 137 Gen 3
テザー給電とSLAMで狭所を飛行し、目視・オプションの板厚計測を行う点検ドローン
Current tether-powered, SLAM-assisted confined-space drone. Thickness measurement requires the optional UTM payload. This generation differs from the Scout 137 used in the 2020 example; validate suitability for each site.
各行业的具体替代作业
对应各行业工序流程中的哪道工序、哪项作业。点击行业名称查看完整流程，点击 ▼ 展开作业列表。
Heavy Industry & Shipbuilding：Shipyard Hull Construction Line
替代作业 1 项
- 8. Inspection (welds, coatings, compartments)Replacing scaffold inspection inside tanks and holds with drone visual checks and thickness gauging (adjacent case on ships in service)
咨询哪款机型更合适
我们将根据现场条件，协助筛选候选机型并规划 PoC。